Key-Macro: 6 Kauj Ruam (nrog Duab)

2024 Tus sau: John Day | [email protected]. Kawg hloov kho: 2024-01-30 09:29

Txoj haujlwm no suav nrog ntu yim pab keyboard uas xa macros (cov ntawv kab ntawv) mus rau lub khoos phis tawj. Txog li 64 macros tuaj yeem khaws cia ua ntej hauv cov ntawv sau khaws tseg hauv daim npav microSD. Cov macros no tau teeb tsa hauv yim nplooj ntawv uas tuaj yeem xaiv nrog cov yuam sij ua ke.

Ib qho ntawm 3D qhov chaw luam tawm ntawm txoj haujlwm no yog ua raws:

0.96 128x64 OLED Snapfit case los ntawm TAz00, tau ntawv tso cai raws li Creative Commons -Attribution licence.

Kauj Ruam 1: Cheeb Tsam:

Koj yuav xav tau cov hauv qab no:

• Pro Micro Leonardo Atmega32u4 Arduino.
• Oled Display Module Ssd1306 0.96 "128 × 64.
• Micro SD Card Nyeem Ntawv.
• TTP226 Capacitive Touch Sensor Module.
• 2 × Laub Khawm Micro Hloov 6 × 6 × 9 hli
• Cov ntawv luam tawm 3D (4 ntu).

Kauj ruam 2: Kev thaiv kab

Txuas cov pins ntawm cov khoom siv rau Arduino raws li hauv qab no:

1. Laub Khawm:

   • SEL rau Arduino GND thiab A2
   • RES rau Arduino GND thiab RST

2. SD nyeem ntawv:

   • CS rau Arduino D10
   • MISO rau Arduino D14
   • SCK rau Arduino D15
   • MOSI rau Arduino D16
   • Vcc rau Arduino Vcc
   • GND rau Arduino GND

3. Kov Sensor Module:

   • Tawm ntawm 8 mus rau 1 mus rau Arduino D4, D5, D6, D7, D8, D9, A1, A0 (hauv ntu no).
   • Vcc rau Arduino Vcc
   • GND rau Arduino GND

4. OLED Zaub:

   • SDA rau Arduino D2
   • SCL rau Arduino D3
   • Vcc rau Arduino Vcc
   • GND rau Arduino GND

Kuv pom zoo ua raws ntu no txhawm rau txhawm rau ua kom cov khoom sib xyaw. Qhov no ua rau txheej txheem thaiv kab mob yooj yim dua.

Kauj ruam 3: Sib dhos

Thaum tag nrho cov khoom sib txuas ua ke, haum thiab lo cov nyees khawm thawb rau hauv qhov chaw, ntxiv rau qhov ntsuas qhov ntsuas qhov ntsuas thiab Arduino mus rau 3D-luam tawm puag. Tom qab ntawd, ua tib yam nrog lub hau npog thiab haum rau MicroSD nyeem ntawv thiab nws npog rau tib daim. Thaum kawg, haum thiab lo rau OLED cov zaub rau lub hau thiab lo rau lub npog keyboard.

Kauj Ruam 4: Arduino Sketch

Daim duab ua haujlwm nrog cov twj siv lus Askiv. Cov lus Spanish yuav muaj sai sai no!

Kauj ruam 5: Macros Text File

Cov ntaub ntawv nrog macros (macros.txt) yuav tsum muab khaws cia rau hauv daim npav MicroSD thiab teeb tsa raws li hauv qab no:

-/Page1/-NamePage1-/Macro1/-NameMacro1..-/Macro2/-NameMacro2..-/Macro3/-NameMacro3..-/Page2/-NamePage2-/Macro1/-NameMacro1..-/Page8/-NamePage8 -/Macro8/-NameMacro8.

Cov npe ntawm macros thiab nplooj ntawv yog xaiv tau thiab tsuas yog tshwm hauv OLED zaub los txheeb xyuas cov no. Yog tias koj tsis suav lub npe macro, thawj cov cim ntawm nws yuav tshwm sim.

Koj tuaj yeem rub cov ntaub ntawv macros.txt ua piv txwv ntawm macros ntau rau LaTeX, Arduino, C, thiab Python.

Kauj Ruam 6: Yuav Siv KeyMacro li cas:

Txuas tus Key-Macro mus rau USB chaw nres nkoj ntawm lub computer siv lub micro USB cable. Lub khoos phis tawj yuav lees paub nws li cov keyboard. Nias lub pob Xaiv ntawm Key-Macro thiab tos kom txog thaum lub vijtsam raug hloov tshiab, tom qab ntawd nias tus lej nplooj ntawv ntawm cov keyboard kov. Cov npe ntawm macros hauv nplooj ntawv xaiv yuav tshwm ntawm cov zaub. Nias tus lej ntawm tus keyboard kov thiab Key-Macro yuav xa txoj hlua mus rau lub khoos phis tawj. Txhawm rau hloov cov nplooj ntawv macros, nyem lub pob Xaiv tom qab tus lej ntawm nplooj ntawv xav tau.