Cov txheej txheem:

Suab Qhib Lub Koob Yees Duab Flash: 13 Kauj Ruam (nrog Duab)
Suab Qhib Lub Koob Yees Duab Flash: 13 Kauj Ruam (nrog Duab)

Video: Suab Qhib Lub Koob Yees Duab Flash: 13 Kauj Ruam (nrog Duab)

Video: Suab Qhib Lub Koob Yees Duab Flash: 13 Kauj Ruam (nrog Duab)
Video: LOKY -Txhob Ua Yog Toog (Official MV )Hmong New Song 2024, Kaum ib hlis
Anonim

Los ntawm Tsis Tshua Muaj Xim Kuv Tus YouTube ChanelFollow Ntau los ntawm tus sau:

USB Flash Drive zais hauv lub Power Bank
USB Flash Drive zais hauv lub Power Bank
USB Flash Drive zais hauv lub Power Bank
USB Flash Drive zais hauv lub Power Bank
Ntawv Mache Bluetooth Hais Lus
Ntawv Mache Bluetooth Hais Lus
Ntawv Mache Bluetooth Hais Lus
Ntawv Mache Bluetooth Hais Lus
Txuas Sab Nraud Hard Drive rau Android Smartphone
Txuas Sab Nraud Hard Drive rau Android Smartphone
Txuas Sab Nraud Hard Drive rau Android Smartphone
Txuas Sab Nraud Hard Drive rau Android Smartphone

Txog: Ua rau koj zoo siab Ntau Yam Tsis Tsaug Xim »

Kuv qhia koj yuav ua li cas kom lub suab qhib lub teeb pom kev zoo siv Lub Koob Yees Duab Flash. Koj tuaj yeem siv qhov no rau Halloween tog.

Kauj ruam 1: Saib Video

Image
Image

Hauv cov vis dis aus no koj tuaj yeem pom qhov txiaj ntsig koj yuav tau txais yog tias koj txiav txim siab ua qhov haujlwm no ntawm koj tus kheej. Ncua sij hawm

  • 0:07 - Saib ua ntej
  • 0:25 - Xeem Tsim
  • 1:07 - Xeem
  • 3:00 - Tsim Kev Ruaj Khov
  • 5:17 - Kev nthuav qhia

Ceeb toom! Vim tias tus lej tus lej thiab qhov ntsuas qhov ntsuas nrawm, cov vis dis aus tsis sawv cev rau qhov tshwm sim tseeb, hauv lub neej tiag tiag qhov no zoo li tons zoo dua.

Kauj Ruam 2: Npaj Cheeb Tsam rau Kev Xeem Tsim

Txuas Txhua Cheeb Tsam
Txuas Txhua Cheeb Tsam

Cheebtsam:

  • Ntawm Lub Koob Yees Duab Lub Teeb (koj tuaj yeem siv txhua lub teeb nyem, rau qee qhov ua rau koj yuav xav tau cov khoom siv ntxiv uas tso cai txuas txuas txuas rau 3.5mm lub qhov (socket) (x1)
  • Khoom noj khoom haus (x1)
  • Fais fab mov rau Breadboard (x1)
  • Analog Suab Module (x1)
  • Jumper (dupont) xov hlau (x4)
  • USB rau Barrel Jack DC (5.5/2.1mm) Fais fab cable (x1)
  • Fais Fab Nyiaj Txiag (ib qho twg ntawm 5V DC) (x1)

Kauj Ruam 3: Txuas Txhua Cheeb Tsam

Txuas Txhua Cheeb Tsam
Txuas Txhua Cheeb Tsam
Txuas Txhua Cheeb Tsam
Txuas Txhua Cheeb Tsam

Txuas txhua qhov no los ntawm kev siv daim ntawv qhia zaub mov raws li koj tuaj yeem pom ntawm cov duab saum toj no.

  • Txuas VCC tus pin nkag mus rau qhov zoo tawm (Txiv kab ntxwv jumper cable ntawm daim duab);
  • Txuas GND tus lej nkag mus rau qhov tsis zoo tawm (Xiav jumper xaim ntawm daim duab);
  • Txuas OUT tus pin mus rau Lub Koob Yees Duab Flash Central (X-Sync/Trigger) tus pin (Ntsuab jumper hlau ntawm daim duab);
  • Txuas Tsis Zoo org GND tawm mus rau Lub Koob Yees Duab Hauv av (Dawb jumper xaim ntawm daim duab);
  • Txuas 5V cable rau lub rooj tsav xwm fais fab;
  • Nias On/Off hloov ntawm lub hwj chim (Ntsuab LED yuav tsum teeb);
  • Qhib lub Koob Yees Duab.

Feem ntau los ntawm lub neej ntawd, dhia ntawm lub zog hluav taws xob, twb teeb tsa ntawm 3.3 volt tawm, tab sis koj tuaj yeem hloov qhov no yog tias koj lub rooj tsav xwm fais fab muaj 5.0v teeb tsa.

Pom zoo: