Solderdoodle Plus: Soldering Iron With Touch Control, LED Feedback, 3D Printed Case, and USB Rechargeable: 5 Steps (with Pictures)

2024 Tus sau: John Day | [email protected]. Kawg hloov kho: 2024-01-30 09:27

Thov nyem hauv qab no mus ntsib peb qhov project Kickstarter nplooj ntawv rau Solderdoodle Plus, ib lub xov tooj cua USB uas tsis muaj peev xwm rov tau kub ntau lub cuab yeej thiab xaj ua ntej ua qauv!

www.kickstarter.com/projects/249225636/solderdoodle-plus-cordless-usb- rechargeable-hot-mu-0

Cov Lus Qhia no qhia txog Qhib Chaw Tshiab USB rov siv tau cov hlau txuas hu ua Solderdoodle Plus. Ob zaug kom muaj zog zoo li qub Solderdoodle, nws nta 10 Watts ntawm kev hloov kho lub zog nrog kov tswj, LED cov xwm txheej ntsuas, thiab tuaj yeem hloov pauv tau cov cuab yeej txuas. Los so kom kho lub zog thiab nias qis kom qhib cua sov. Cov yam ntxwv muaj kev nyab xeeb suav nrog hom pw tsaug zog uas ua rau chav tsis ua haujlwm thaum tsis siv, ceeb toom roj teeb tsawg, thiab tswj lub roj teeb ob lub xov tooj.

Solderdoodle Plus tuaj yeem kav ntev dua 1 teev nrog lub zog siab tshaj plaws ntawm 500 Degrees C.

Koj tuaj yeem sau mus rau txhua qhov chaw thiab tseem muaj txoj hauv kev los them koj lub Solderdoodle Plus yog tias muaj lub khoos phis tawj, USB roj teeb, phab ntsa hloov pauv, lossis txawm tias lub USB hnub ci them nyiaj nyob ze! Xwb, koj tuaj yeem siv Solderdoodle Plus ua cov cuab yeej txuas, uas txhais tau tias nws tuaj yeem them thiab tso tawm tib lub sijhawm.

Solderdoodle Plus Cov Lus Qhia:

* Lub sijhawm kom them tag nrho: ~ 3 teev

* Peev Xwm: 2000mAh/7.2V * Hom: 2X Panasonic NCR18500A Lithium-Ion

* Loj: Txoj kab uas hla: 1.75 nti * Ntev: 8.5 nti

* Lub cev Khoom siv: Nylon * Nyhav: 149g (5.3 oz)

* Cov tswv yim Cable - 3 'Nylon Braided Txiv neej USB Hom A rau Micro Txuas

* Cov tswv yim - Tam sim no: Txog 2500mA | Qhov Voltage: 5 Volts

* Cov zis - Tam sim no: 2000mA | Voltage: 5 Volts * Lub Hwj Huam Tso Tawm: 10 Watts

* Roj Teeb Lub Neej Raws Li Siv Tau: 5-10 xyoo txog thaum lub roj teeb muaj peev xwm txo qis

* Muab 1 teev ntawm cov cua sov txuas ntxiv ntawm lub zog * Ua kom sov ntau dua 572ºF (300ºC) hauv tsuas yog 15 vib nas this

*CEEB TOOM: Ceev faj thaum tuav ib lub roj teeb Lithium-Ion vim tias lub roj teeb luv tuaj yeem ua rau kub hnyiab. Ib txwm hnav tsom iav kev nyab xeeb. Thov siv cov roj teeb pom zoo thiab cov khoom siv hluav taws xob vim tias siab dua 2500mA max roj teeb them tam sim no koom nrog. Cov ntawv luam tawm 3D tuaj yeem ua rau lub qhov kub siab. Qhov no tsuas yog ib qho piv txwv thiaj li yuav muaj teeb meem kev ua haujlwm uas tseem tsis tau raug kho dua.

Kauj Ruam 1: Cov Ntaub Ntawv thiab Cov Cuab Yeej Yuav Tsum Tau

KHOOM:

QTY Nqe lus piav qhia

1 Weller BP645 Soldering Iron1 Solderdoodle Plus Dual Lithium-Ion Charge Controller Circuit (Schematic, Gerber Files, thiab lwm yam.

1 Solderdoodle Plus Controller Board (Schematic, Gerber Files, thiab lwm yam.

2 NCR18500A 2000mAh Tsis Muaj Kev Tiv Thaiv Panasonic Lithium Ion Battery

7 LED Teeb Yeeb Nkab Bivar VLP-350-F

1 Kov Sensor Interlink FSLP 34-00003

1 Solderdoodle Plus case case set (STL file can be downloaded from the previous page, Shapeways recommended 3D Print vendor) Sab A: https://www.shapeways.com/product/Y39XUHLAE/solder… Sab B: https:// www.shapeways.com/khoom/V989SCE4S/laug…

4 2-28 x 1/2 Thread Forming Screws

Ntau Yam Ntev 20 AWG Tso Tawm Liab/Dub w/Silicone Jacket 5 Amp Max Wire https://www.digikey.com/product-detail/en/cnc-tech…https://www.digikey.com/product-detail/ en/cnc-tech… nyeem ntxiv

1 Micro Fais Fab Txuas 1X4

1 Micro Fais Fab Txuas 2X2

1 Micro Fais Fab Txuas 1X2

10 Poj Niam Crimp Terminal 20-24 Gage

Cov cuab yeej:

QTY Nqe lus piav qhia

1 2-28 T6 Torx tus tsav tsheb

1 Hlau Strippers 20-24 ntsuas ntau

1 Hlau Crimper 20-24 ntsuas ntau

1 Daim Kab Xev

1 Thib Peb Cov Cuab Yeej Siv Hluav Taws Xob

1 Soldering Hlau

1 Hobby Riam

1 Programmer nrog Teensy 3.6, Breadboard, thiab Wires/Pogo Pins (Schematic tuaj yeem rub tawm los ntawm nplooj ntawv dhau los)

1 Khoos phis tawj nrog Tseeb Arduino Kev Txhim Kho Software Txhim Kho

1 USB Cable

1 Dremel nrog Diamand Wheel Point Tip

Dej ntws

Solder

Kauj Ruam 2: Cov Cua Kub thiab Cov Hluav Taws Xob Ua Ke

(Tsis teb los tau: Tshem tawm cov cua sov) Tshem tawm cov khoom siv hlau Weller, tshem tawm txhua ntu, thiab tsuas yog khaws cov cua sov ua ke. Desolder coiled xaim thiab LED cable los ntawm cov cua sov. Siv Dremel cov cuab yeej nrog lub pob zeb diamond taw tes me ntsis txhawm rau zom thaj tsam ib puag ncig thiab sab hauv lub qhov me me qhov twg hloov lub caij nplooj ntoo hlav txuas txhawm rau tshem tawm cov plating rau soldering thiab nce qhov loj me me.

Txiav 1-1/8 "ntev ntawm cov xov liab thiab dub. Sawb.06" tawm ob qho kawg ntawm cov xov liab thiab muab ib qho kawg tso rau hauv qhov me me. Siv tus tes thib peb txhawm rau txhawm rau yooj yim dua. Lub tsho silicone tau hloov pauv heev yog li koj tuaj yeem xaub lub tsho rov qab yog tias koj xav tau nthuav tawm xaim ntau ntxiv ib ntus. Siv cov dej ntws thiab tom qab ntawd muab cov hlau txuas rau hauv lub qhov me me nrog tsuas yog xaim me me lo tawm ntawm lwm sab rau cov laug kom ntws. Cov kab tom ntej.06 "ntawm ib kawg ntawm cov xaim dub thiab.2" tawm ntawm lwm qhov. Soldering lub.2 "stripped kawg rau hauv nruab nrab lub khob ntawm lub taub txuas. Crimp qhov txuas mus rau lwm qhov kawg ntawm xaim thiab txuas 2-Pin txuas rau cov xov hlau raws li qhia hauv daim duab (Pin 1: RED, Pin 2: Dub).

Txiav 3-3/8 "ntev ntawm cov xim dub thiab peb txoj kab liab. Sawb.06" tawm ob qho kawg ntawm tag nrho cov xov hlau no thiab txuas txuas rau ntawm txhua qhov kawg. Txuas cov xov hlau raws li qhia hauv daim duab thiab hauv tus lej npe hauv qab no:

2X2 Connector rau 4X1 Connector

Pin 1: Liab --- Pin 4

Pin 2: Dub --- Pin 3

Pin 3: Liab --- Pin 2

Pin 4: Liab --- Pin 1

Tshem tawm cov lus qhia ntawm qhov chaw no rau kev teeb tsa kev nyab xeeb hauv cov kauj ruam kawg.

Kauj Ruam 3: Solderdoodle Plus Programming

Cov hauv qab no yog kev qhia yuav ua li cas rub tawm cov software tswj mus rau Solderdoodle Plus Tus Tswj Xyuas Haujlwm. Koj tsis tas yuav siv cov khoom seem ib yam nkaus thiab feem ntau yuav yog tias koj muaj ib hom qhob cij thiab Teensy 3.2 lossis 3.6, koj tuaj yeem pom cov khoom seem tso ib puag ncig los xaim khoom. Nrog rau thawj nplooj ntawv ntawm Cov Lus Qhia no yog Solderdoodle Plus Arduino kos duab thiab cov phiaj xwm rau siv. Cov LEDs thiab cov tiv thaiv tsis tas yuav yog qhov tseeb vim tias lawv tsuas yog txhawm rau txheeb xyuas ob zaug tias tus programmer tau sib tham. Koj tuaj yeem siv pawg Arduino ib yam nkaus, tab sis koj yuav xav hloov qee qhov chaw.

Solderdoodle Plus Control Board muaj 2X3 los ntawm qhov vias nyob rau ntawm kaum nrog.1 sib nrug rau kev ua haujlwm ntawm Attiny84A. Kuv siv cov pogo pins txuas rau 2 kev cai txiav proto board daim thiab soldered nyob rau hauv qhov chaw. SUB siab cov poj niam pins crimped thiab cua sov poob rau ntawm ib kawg thiab txiv neej D-SUB siab ceev pins crimped ntawm lwm qhov kawg txuas rau lub khob cij. tom qab ntawd muab me ntsis sab siab kom ntseeg tau tias cov xov hlau lossis tus pin ua kev sib cuag nrog cov phiaj xwm vias.

FLASH TEENSY PROGRAMMER

0. Txheeb ob zaug kom paub tseeb tias koj muaj software tshiab Arduino TSIS TXHOB siv MICROSOFT STORE (Txhim Kho nrog Microsoft Store ntawm Windows tso qhov program rau hauv daim nplaub tshev uas Teensy nkag tsis tau).

1. Nruab Teensyduino (Txawm hais tias koj xav tias koj twb muaj qhov no lawm, txheeb xyuas dua rau qhov hloov tshiab kawg):

www.pjrc.com/teensy/teensyduino.html

2. Qhib daim duab no (TeensyProgrammer.ino) hauv Arduino IDE.

3. Txuas Teensy rau lub khoos phis tawj thiab hloov cov ntawv qhia zaub mov no (Yog tias nws tsis ua haujlwm, sim lwm USB cable raws li lawv tuaj yeem ua tsis zoo):

Xaiv Teensy tus qauv hauv Cov Cuab Yeej> Pawg Thawj Coj

Xaiv Teensy hauv Cov Cuab Yeej> Chaw Nres Nkoj

Cov cuab yeej> Tus tsim tawm> "AVR ISP"

4. Nyem rau "Upload" khawm (txoj cai-taw qhia lub cim cim) kom suav thiab nyem Teensy nrog TeensyProgrammer code.

QHOV SOLDERDOODLE CONTROL BOARD

0. Nco ntsoov tias tsis muaj dab tsi txuas nrog rau Solderdoodle Plus Controller Board tsis tau.

1. Ntxiv ATtiny txhawb rau koj Arduino IDE los ntawm kev mus rau cov ntawv qhia zaub mov xaiv no:

Cuab Yeej> Pawg Thawj Coj> Tus Thawj Saib Xyuas Haujlwm: tshawb "attiny" thiab nyem "Install"

2. rov pib dua Arduino IDE.

3. Qhib koj daim duab (SolderDoodle_Plus.ino) hauv Arduino IDE.

4. Nrog Teensy txuas nrog koj lub khoos phis tawj, hloov cov ntawv qhia zaub mov no:

Cov Cuab Yeej> Pawg Thawj Coj: "ATtiny24/44/84"

Cuab Yeej> Tus Txheej Txheem: "ATtiny84"

Cuab Yeej> Clock: "Sab Hauv 8 MHz"

Cov Cuab Yeej> Chaw Nres Nkoj: Hauv qab cov chaw nres nkoj, qhov twg los xij muaj "Teensy" hauv lub npe.

Cov cuab yeej> Tus tsim tawm: "Arduino ua ISP"

5. Txuas koj li kev cai 2X6 cov phiaj xwm txuas rau hauv Solderdoodle Plus Tus Tswj Xyuas Haujlwm.

6. Yog tias koj tab tom siv Hom Tshuaj Tshiab Solderdoodle Plus Tus Thawj Saib Xyuas Haujlwm, siv cov cuab yeej no ua ntej mus ntxiv:

Cuab Yeej> Hlawv Bootloader

Qhov no yuav tsum kho lub moos nrawm ntawm lub nti.

7. Thaum kawg: Nyem rau "Upload" khawm kom nyem ATtiny nti. Cov LEDs yuav tsum ntsais muag, Sketch qhov rai yuav tsum hais kom ua tiav, thiab koj ua tiav!

SYSTEM CHECK

Plug rau hauv lub hwj huam txuas mus rau Solderdoodle Plus Dual Charge Control Board thiab txuas nws mus rau Solderdoodle Plus Control Board. Tig lub hwj huam hloov mus, thiab sim tawm lub ntsuas qhov ntsuas kom paub tseeb tias nws ua haujlwm tau zoo ua ntej txuas ntxiv. Yog tias nws ua haujlwm tau zoo, tig lub hwj huam hluav taws xob tawm thiab txuas lub hwj chim cable los ntawm Solderdoodle Control Board.

Kauj Ruam 4: Solderdoodle Plus Assembly

Tam sim no rau cov kauj ruam kawg hauv Cov Rooj Sib Tham! Ua ntej yuav tsum paub tias 3D qhov chaw luam tawm tsis raug, yog li kos saib seb txhua ntu haum li cas ua ntej txuas ntxiv nrog kev sib dhos. Koj yuav tsum tau siv rab riam hobby kom tshem cov khoom me me yog tias qhov haum nruj dhau, tshwj xeeb tshaj yog nyob ib puag ncig cov cua sov sib dhos kab noj hniav. Kuv xav tias cov xim dub tau ntxiv cov xim uas ntxiv tuab me ntsis thiab.

Qhov thib ob, siv Solderdoodle Controller Board los ntawm nws tus kheej thiab nias hauv xovxwm haum LED teeb kav. Yog tias muaj qhov sib txawv me ntsis thiab nws tsis swb txhua txoj hauv kev uas tsis ua li cas.

Qhov thib peb, txuas lub xov tooj ntawm tes kov lub ntsej muag hauv qhov kev qhia uas pom hauv daim duab.

Plaub, teeb lub roj teeb rau hauv Dual Charge Control Board lub roj teeb ua kom ntseeg tau tias qhov kawg ntawm lub roj teeb nkag mus rau cov ntawv lo uas sau tias BAT1 thiab BAT2.

Thib tsib, txuas lub hwj chim cable, Dual Charge Controller Board, thiab Cua Kub Element Cable rau Solderdoodle Control Board. Ua kom ntseeg tau tias lub xov tooj hluav taws xob sib tw nyob ib puag ncig hauv cov lus qhia hauv daim duab.

Thib rau, ua kom ntseeg tau tias qhov kev tiv thaiv thaub qab ntawm qhov kov lub ntsej muag raug tshem tawm thiab tso tag nrho lub rooj tsavxwm thiab kab sib dhos rau hauv Ib Sab 3D luam ntawv rooj plaub nrog lub kov sensor mus ua ntej. Nco ntsoov tias qhov kov cov xov tooj hluav taws xob khawm zoo ib yam li nws tau qhia hauv daim duab. Yog tias qhov haum nruj dhau, tshwj xeeb tshaj yog nrog USB txuas, tshem tawm thiab txiav cov yas ntau dhau nrog rab riam nyiam thiab sim dua. Lub Rooj Tswjhwm Saib Xyuas Menyuam Yaus muaj lub thais uas yuav tsum haum nyob ib ncig ntawm cov yas yas tab sab hauv sab A. Thawb cov xov hlau rau hauv qhov chaw txhawm rau tshem tawm txhua lub caij nplooj ntoo hlav thiab sib dhos ua ke. Yog tias xav tau, tso ib daim kab xev los tuav lub rooj sib dhos ruaj khov hauv rooj plaub.

Xya, qhov no yuav yog qhov nyuaj tshaj plaws hauv kev sib sau ua ke, tab sis txuas Sab B 3D luam tawm rooj rau Sab A thaum ua kom ntseeg tau tias cov kab hluav taws xob sab hauv tsis txav mus. Txuas cov khoom siv cua sov ua ke thawj zaug zoo li yog txoj hauv kev zoo tshaj plaws thaum ua kom ntseeg tau tias qhov kov lub ntsej muag swb hauv kab noj mating thiab LED teeb lub raj xa mus los ntawm lub qhov rau saum. Cov cuab yeej siv hluav taws xob xaim hluav taws xob tuaj yeem ua rau khawb tawm yog li ceev faj tias kev txhuam me me los yog khawb ntawm lub xov tooj tshwm sim thaum sib dhos. Ua kom ntseeg tau tias txhua lub rooj kom raug los ntawm kev ua kom ntseeg tau tias lub ntsej muag kov tsis tau khoov los yog dov thiab tsis muaj qhov khoob loj hauv cov nqaws lossis ntu ntu tawm. Yog tias koj yuav tsum thawb sab hauv rooj plaub thaum sib dhos, xyuas kom tseeb tias koj muab cov yas lossis cov cuab yeej uas tsis siv coj los ua poking nrog cov khoom hlau tuaj yeem ua rau luv.

Yim, thaum tuav Sab A thiab B ua ke, ntxig 4 tus ntsia hlau thiab ntswj lawv rau hauv. Yog tias koj xav ua cov ntawv "Solderdoodle Plus" ntawm rooj plaub sawv tawm ntau dua, tsuas yog pleev xim cov ntawv uas tau tsa nrog xim sib txawv. Ua ntej txuas cov lus qhia ntxaws, tig lub hwj chim thiab txheeb xyuas kom paub tseeb tias kev kov kov ua haujlwm. Los so thiab nqis los kho lub zog thiab thawb rau ntawm lub ntsuas kom qhib cua sov. Tsis tas li, triple kais lub ntsuas kom tso rau hauv hom pw tsaug zog thiab siv peb zaug ntxiv kom sawv. Hom pw tsaug zog tau txais kev ua haujlwm tom qab 5 feeb ntawm qhov tsis ua haujlwm.

CONGRATULATIONS! Koj tau tsim lub tsev Solderdoodle Ntxiv! Tam sim no koj tuaj yeem xa cov lus qhia ntxaws thiab mus rau qhov laug!

Kauj Ruam 5: Kev Nyab Xeeb thiab Teeb Meem

LIVE STREAM DEMONSTRATION SAWV DAWS SAWV DAWS

Qhov ntsuas kub no qhia tau tias qhov zoo ntawm Solderdoodle Plus yog siab heev. Txawm li cas los xij, qhov no tsuas yog cov qauv ua piv txwv thiaj li yuav muaj teeb meem nrog kev ua haujlwm uas tseem tsis tau raug kho dua.

Solderdoodle Plus tsuas yog tig los ntawm kev swiping ntawm lub sensor thiab tom qab ntawd nyem rau ntawm lub sensor, yog li kuv muab qhov hnyav hnyav rau ntawm lub ntsuas thiab cia nws khiav nrog ntsuas kub ntsuas qhov kov. Kuv coj cov duab ntawm qhov kev xeem thiab npaj nws hauv kab ntawv, uas tau qhia saum toj no. Koj tuaj yeem pom tias qhov kub nyob ib puag ncig 500 Deg C rau ntau tshaj li ib teev ntawm lub zog siab tshaj plaws. Lub software kaw lub kaw lus thaum lub roj teeb pob hluav taws xob poob qis dua 6.1 Volts. Hauv kev siv ib txwm muaj, lub hwj huam khawm tsis tuav ntev ntev, yog li nws yuav tsum siv sijhawm ntev dua thaum siv ib txwm muaj.

Solderdoodle Plus 'lub roj teeb pob siv tus tswj hwm tus nqi ntawm txhua lub xov tooj. Txhua tus tswj hwm tus nqi nyob ntawm ib qho chaw sib cais, ua kom ntseeg tau tias txhua lub xov tooj ntawm tes ywj pheej thiab tsis mus dhau qhov siab tshaj thiab qhov tsawg kawg nkaus, uas tso cai rau cov cell nyob ntev li 5 txog 10 xyoo ua ntej xav tau hloov pauv.

KEV NYUAJ SIAB

Tsis txhob tso Solderdoodle Plus nyob rau hauv tshav ntuj ncaj qha. Khaws nws npog lossis hauv qhov ntxoov ntxoo. Tshav kub los ntawm lub hnub tuaj yeem ua rau lub tsub nqi hluav taws xob thiab roj teeb tau kub heev, tsis txhob them nyiaj, txo qis roj teeb, thiab ua rau nws lub neej luv.

Kev Ua Haujlwm Kub Tau Txais: Solderdoodle Plus tau tsim los ua haujlwm hauv qhov kub thiab txias ntawm 0º thiab 45º C (32º thiab 149º F).

Cia: Hloov lub hwj chim tawm, tshem tawm cov lus qhia, thiab khaws Solderdoodle Plus hauv chav sov. Solderdoodle Plus yuav tsum tau rov them dua ib xyoos ib zaug txhawm rau tiv thaiv kev tso tawm ntau dhau.

Kom tau txais txiaj ntsig zoo tshaj, them tus nqi Solderdoodle Plus ua ntej siv.

TSEEM CEEB

Kov Tswj Tsis Teb:

1) Triple kais qhov kov lub ntsej muag kom tsa Solderdoodle Ntxiv yog tias nws hom pw tsaug zog, uas tshwm sim tom qab 5 feeb tsis ua haujlwm.

2) Tshem tawm qhov kov lub sensor thiab xyuas kom lub txuas thiab cable huv thiab tsis muaj kev cuam tshuam.

2) Tshem tawm qhov kov lub ntsej muag los ntawm cov ntaub ntawv yas thiab rov nruab dua kom paub tseeb tias lub rooj zaum tau raug pom zoo txhua txoj hauv kev. Ib qho khoov lossis kinks hauv qhov kov lub ntsej muag yuav tiv thaiv lub cuab yeej los ntawm kev ua haujlwm kom raug.

Them LEDs tsis teeb thaum them los ntawm kuv lub laptop:

1) Qhov no tuaj yeem tshwm sim yog tias Solderdoodle Plus tau txhaws tag thiab nkag mus rau lub hom phiaj dag. Khaws Solderdoodle ntsaws rau li 15 feeb thiab LED teeb teeb yuav tsum tig rov qab.

2) Qee lub khoos phis tawj qub muaj qhov txwv tsawg tam sim no hauv lawv cov chaw nres nkoj USB thiab yuav ua rau lub USB chaw nres nkoj yog tias tam sim no tshaj qhov txwv. Sim ntsaws Solderdoodle rau lwm qhov chaw nres nkoj USB lossis siab dua tam sim no USB phab ntsa adapter.