3D Luam Ntawv Dav Hlau TURBINE: 3 Kauj Ruam

2024 Tus sau: John Day | [email protected]. Kawg hloov kho: 2024-01-30 09:27

Hav txhua tus, yog li kuv tau ua lub dav hlau dav hlau nrov tshaj plaws lossis lub cav qauv uas ua haujlwm los ntawm 1400kv BLDC MOTOR.

txoj haujlwm no yog qhov yooj yim zoo li peb tsuas yog xav tau 3D luam tawm lub cev ua ntej thiab tom qab ntawd sib sau ua ke tag nrho, txuas ESC nrog bldc lub cev muaj zog thiab khiav nws ntawm qhov yooj yim Arduino x lauj kaub kos duab.

Thawj zaug, saib cov vis dis aus kom nkag siab cov ntsiab lus.

yees duab

Kauj Ruam 1: Cov ntaub ntawv

Sau txhua yam uas peb xav tau los tsim txoj haujlwm no,

1. BLCD TSAV

2. ESC

3. ARDUINO (koj tuaj yeem siv ib qho arduino rau qhov no)

4. 10kOHM POT

5. 12V 10amps (ntau dua lossis tsawg dua) cov roj teeb lithium

6. 3D qhov chaw luam tawm; tau lawv los ntawm no (https://www.thingiverse.com/thing:3503806)

3D luam tawm ntu nrog cov khoom koj nyiam, Kuv nyiam siv ABS. tom qab luam tawm txhua ntu, sib sau ua ke thiab ntxiv BLDC lub cev rau qhov teeb tsa no. tom qab teeb tsa lub cev rau koj lub dav hlau cua, tam sim no peb tuaj yeem ntxiv Arduino rau qhov teeb tsa no.

Kauj ruam 2: Ciruitory

ua daim thaiv npog lossis xaim txhua yam ntawm daim ntawv qhia zaub mov raws li SCH.

Kauj ruam 3: CODE THIAB TEST RUN

Nov yog tus lej, xa qhov no rau koj Arduino thiab txuas lub roj teeb rau koj li ESC thiab sim khiav koj lub dav hlau JET.

#include // Siv Servo librarey los tsim PWMServo ESC; // npe cov khoom siv servo, ntawm no ESC

void teeb tsa ()

{

ESC.attach (6); // Tsim PWM hauv tus pin 6 ntawm Arduino

}

void lub voj ()

{

int qhov tuav = analogRead (A0);

throttle = daim ntawv qhia (lub raj, 0, 400, 0, 180);

ESC.write (kaw qhov rooj);

}