Cov txheej txheem:

Tub sab tswb: 3 Kauj ruam
Tub sab tswb: 3 Kauj ruam

Video: Tub sab tswb: 3 Kauj ruam

Video: Tub sab tswb: 3 Kauj ruam
Video: KOJ NYOB PUAS KAJ SIAB TUB TSWB Wwj( nkauj tawm tshiab )2023 2024, Kaum ib hlis
Anonim
Tub Sab Tswb
Tub Sab Tswb

Tsis ntev los no nthwv dej ntawm kev ua tub sab tau pib hauv peb cov neeg zej zog thiab peb tau txiav txim siab nqis tes ua. Txawm tias thaum peb tsis nyob hauv tsev, peb yuav paub yog tias leej twg tau ua txhaum thiab peb tseem yuav tau kaw cov tub sab thaum lub sijhawm ua tub sab.

Peb tus kws tshuaj ntsuam xyuas qhov deb yuav tshuaj xyuas seb qhov kev ncua deb tau luv dua vim tias muaj ib tus neeg nkag los hauv tsev. Yog tias qhov kev ncua luv luv, lub tswb nrov yuav nrov thiab lub microphone pib kaw.

Peb yog leej twg

Nimrod thiab Noam, Computer Science thiab Kev Ua Lag Luam cov tub ntxhais kawm los ntawm Interdisciplinary Center (IDC), Herzliya, Israel.

Khoom siv

  • 1 x ESP8266 lub rooj tsavxwm
  • 1 x Micro-USB Cables
  • 10 x jumper kab
  • 1 x Ultrasonic sensor
  • 1 x hais lus
  • 1 X ADMP401 Micropon
  • 1 x resistor

Kauj ruam 1:

Duab
Duab

Cia peb pib los ntawm kev txuas cov kev sib txuas

Ultrasonic:

  • VCC to 5V
  • Ua rau D7
  • echo rau d6
  • GND to CSY

Hais lus:

  • + rau D7
  • - rau resistor
  • resistor rau GND

Micropon:

  • VCC to 3.3 V.
  • GND to CSY
  • AUD to AW0

Kauj ruam 2:

Duab
Duab

Nruab Arduino IDE:

www.arduino.cc/en/Guide/HomePage

Nruab qhov cuam tshuam "tsav tsheb" rau ESP8266 cov laug cam rau koj Arduino IDE:

randomnerdtutorials.com/how-to-install-esp…

Adafruit

Tsim ib tus account:

io.adafruit.com

Nyem rau Feeds thiab ntxiv 2 txau:

Nrug deb thiab Suab.

Tom qab ntawd, nyem rau ntawm Dashboard thiab tsim lub dashboard tshiab.

Nkag mus rau lub dashboard thiab ntxiv 2 block:

+ Ntsuas ntsuas qhov nrug.

+ Kab Kab thaiv rau Suab.

Txuag nws.

Kauj ruam 3:

Peb cov cai tau txuas nrog.

Koj tuaj yeem qhib txoj cai hauv Arduino.

Tsis txhob hnov qab hloov kho WiFi tsis rau koj tus kheej WIFI tsis.

Pom zoo: