Retro Arcade - (Tag Nrho Loj Tsim los ntawm Raspberry Pi): 8 Kauj Ruam

2024 Tus sau: John Day | [email protected]. Kawg hloov kho: 2024-01-30 09:24

Ua ntej kuv xav ua tsaug rau koj rau kev saib ntawm phau ntawv qhia tsim rau Retro Arcade system no. Kuv tab tom noj lub thawv arcade laus dua thiab muab tso rau hauv lub txee ib leeg nrog 24-nti lub vijtsam saib dav. Kev ntsuas ntawm phau ntawv qhia no yog ntxhib los muab koj lub tswv yim ntawm yuav ua li cas rub tawm cov qauv zoo sib xws. Nyob ntawm koj cov ntaub ntawv xav tau thiab qhov chaw hauv chav koj tsim tuaj yeem sib txawv heev. Kuv tau tso cov npe khoom zoo hauv phau ntawv qhia txhawm rau pab koj txiav txim siab yam koj xav tau, Kuv paub tseeb tias muaj pes tsawg tus Raspberry PI cov khoom siv yuav suav nrog ntau yam khoom uas tuaj yeem txo tus nqi, kuj yog yam zoo li cov neeg hais lus qub, saib, thiab cov kab hluav taws xob tuaj yeem ua tau poob tag nrho tus nqi taw tes.

Cia peb mus rau qhov tsim, Kuv tsoo nws mus rau ntu kom nws yooj yim me ntsis ua raws.

Khoom siv:

Case thiab thav duab:

• 4ea ua

  1/4 Birch lossis Pine plywood panels 24 nti (w) los ntawm 24 nti (h)

• 5ea ua

  1/4 Birch lossis Pine plywood panels 24 nti (w) los ntawm 36 nti (h)

• 5-6 ib

  1in los ntawm 3in los ntawm 8ft Pine lossis ntoo ntoo seem ntoo ntoo ntxhib zeb

• 3-4 xyoo

  1in los ntawm 6in los ntawm 6ft Pine lossis whitewood seem ntoo ntoo ntxhib zeb

• 1 eej

  1/4 Birch lossis ntoo thuv plywood 24 nti (w) los ntawm 6 nti (h)

• 1 yob (10-15 ko taw)

  1 1/4 (w) los ntawm 1/2 (tuab) dub ua npuas ncauj huab cua

• 1 pob

  #6 lossis #8 ntoo ntsia hlau 1/2 nti

• 1 pob

  #6 lossis #8 ntoo ntsia hlau 2 nti

• 4-5 kaus poom

  Txau cov xim nrog primer (xim thiab tus nqi nyob ntawm qhov tsim)

• 2ea ua

  Xaub xauv rau qhov rooj (nraub qaum thiab thaj chaw hais lus)

• 4ea ua

  Qhov khawm me me

Cov khoom Retro Arcade:

• Saib (22-24 nti)

  Yog tias muaj peev xwm tuav tau lub ntsuas saib txij li peb yuav tshem lub plhaub thiab nws yuav tsis yog ib yam uas yuav rov siv tau

• Raspberry Pi (version 3+ lossis zoo dua) nrog Lub Hwj Huam rau PI (51.99)

  www.amazon.com/CanaKit-Raspberry-Power-Sup…

• Case rau PI (6.49)

  www.amazon.com/iUniker-Raspberry-Model-Tra…

• Micro SD (13.00 -25.00)

  www.amazon.com/Professional-SanDisk-MicroS…

• USB chaw nres nkoj (11.99)

  www.amazon.com/Anker-Extended-MacBook-Surf…

• HDMI cable (yuav xav tau DVI lossis VGA adapter rau cov saib qub) (8.44)

  www.amazon.com/AmazonBasics-High-Speed-HDM…

• 3-6 qhov hluav taws xob qhov hluav taws xob (8.57)

  www.amazon.com/GoGreen-Power-GG-16106MS-Ou…

• Sab nraud fused fais fab hloov rau rooj plaub (9.99)

  https://www.amazon.com/gp/product/B06XNMT3WL/ref=p…

• Hais lus (19.99)

  https://www.amazon.com/Creative-Labs-Pebble-Black-…

• Cov Tswj (Xaiv): Liab/Xiav joysticks nrog lub teeb liab/xiav khawm (39.99)

  https://www.amazon.com/Hikig-Buttons-joysticks-Co…

• Cov ntawv nplaum: Atari Games (6.99)

  https://www.amazon.com/Popfunk-Classic-Collectibl…

• USB Drive 32 GB (8.99)

  www.amazon.com/SamData-Drives-Memory-Stora…

Kauj Ruam 1: Nqes Nqis

Subframe Kuv lub hom phiaj rau subframe yog txhua qhov hais txog qhov hnyav, yog li siv ntoo thuv lossis whiteboard ua haujlwm tau zoo. Nco ntsoov ua ntej qhov rau koj cov ntsia hlau kom tsis txhob tawg ntoo yog tias siv qhov chaw laum koj cov ntsia hlau. Kuv tus ncej ntu qis tau tsim rau qhov tshwj xeeb ntawm 36 nti (h) los ntawm 24 nti (w) thiab 19 nti (d). Kuv tau rho tawm 1/2 nti (dav ntawm daim tawv nqaij plywood lub sij hawm ob lub vaj huam sib luag). Yog li 35.5 (h) los ntawm 23.5 (w) los ntawm 18.5 (d)

Cov tawv nqaij plywood rau qhov kev tsim no tau siv los txo qhov hnyav tag nrho nrog rau tus nqi. Kuv tau yuav qee lub vaj huam sib luag ua ntej (24 txog 24) rau ntu saum toj kawg nkaus thiab (24 los ntawm 48) uas tau txiav kom loj me rau qis dua. Scraps los ntawm cov ntawv txiav ntoo yuav raug siv los ua lub platform nruab nrab ntawm cov hauv qab thiab cov ntu sab saum toj nrog rau ob sab ntawm cov kab lus uas cov neeg hais lus tau muab tso rau

Nco ntsoov tias kuv tau muab tus brace rau hauv qab kom txo kev ntxhov siab los ntawm kev txav rooj plaub ntxiv rau txwv tsis pub sway thaum ua si

Kauj Ruam 2: Saum Tshooj

• Cov thav duab Arcade rau ntu sab saum toj tau ua los ntawm kev sib xyaw ntawm cov ntoo dawb lossis ntoo thuv ntoo. Pem hauv ntej thiab ob sab yog 1inch los ntawm 6-nti cov laug cam thiab qhov nce mus rau ntu qis dua yog 1 nti los ntawm 3-nti cov laug cam. Ib qho ntxiv, kev txhawb nqa ntsug yog 1-nti los ntawm 3-nti cov laug cam.
• Cov vaj huam sib luag sab tau txiav thiab ua rau lub thav duab (nce mus rau ob sab ntawm daim kab xev) nrog tus jigsaw. Siv ob ntawm 24 ntawm 24 los ntawm 1/4 plywood panels rau qhov no.
• Tshooj marquee uas yuav tuav cov neeg hais lus (ob qho kev txiav tawm kom tso cai suab mus rau ntu ntu ntawm rooj plaub) tau ua nrog 1-nti los ntawm 6-nti cov laug cam. Cov ntu kawg tau yooj yim plywood panels los npog qhov kawg.
• Cov neeg hais lus yog ib feem ntawm cov marquee (thiab thaum kuv muaj cov hniav nyiaj hniav kub yuav muaj lub qhov hluav taws xob sab nraud txhawm rau ua kom lub suab zoo)
• Kuv txiav tawm ib ntu ntawm ib lub plywood vaj huam sib luag (24 los ntawm 24) los tsim lub bezel saib (thav duab), Qhov no yog qhov deb tshaj plaws ntawm qhov tsim ua rau kuv hloov kho bezel nrog ntxiv 1 los ntawm 3 thav duab thiab qee qhov ua npuas ncauj kom zais qhov khoob. Siv koj lub sijhawm nrog kev ntsuas thiab tsim tawm ob sab ua ntej thiab koj yuav muaj teeb meem tsawg dua li kuv tau ua nrog rau feem ntawm rooj plaub no.

Kauj Ruam 3: Saib Xyuas Mounting

Kuv xav hais txog nqe lus no vim tias nws yuav txawv nyob ntawm qhov khoom siv uas koj xaiv. Kuv siv cov txheej txheem kho vajtse ntawm tus saib kom txuas nws mus rau seem plywood thiab tom qab ntawd mus rau 1 los ntawm 3 H thav duab. Tus saib lub thav duab tau ruaj khov rau hauv ntu ntu los ntawm cov nplais yooj yim ntawm taw ntawm tus ncej thiab nyob rau sab saud sab laug thiab sab xis. Daim ntawv ceeb toom lub monitor bezel tau raug tshem tawm thiab lub rooj tswj hwm tseem txuas nrog. Ntawm qee tus saib, koj yuav xav tau lub peev xwm los qhib lub zog saib lossis xaiv cov tswv yim. Kuv nyiam txiav thawj khawm ntu tawm ntawm lub qub saib thiab ruaj ntseg rau sab nraum qab ntawm lub saib kom yooj yim rau lub zog rau/tawm yog xav tau

Kauj Ruam 4: Nkag Mus Rau Qhov Rooj

• Txog qhov kev tsim no kuv xav tau ob lub qhov rooj nkag sib cais, qis dua tso cai nkag mus rau lub hauv paus tseem ceeb thiab sab saud tso cai nkag mus rau tus hais lus.

  • Lub qhov rooj nkag tau yooj yim tsuas yog 1/4 plywood uas muaj ob lub qhov rooj ntxiv thiab lub qhov rooj swb kom ruaj ntseg lub qhov rooj. Ib daim ntawv yog txij li lub vaj huam sib luag tsuas yog 1/4 tuab, Kuv tau tsim cov thaiv los txuas kuv lub hinges rau lub vaj huam sib luag uas ua kom ntseeg tau tias kuv cov ntsia hlau yuav tsis xuas nrig hla lub vaj huam sib luag.
  • Lub qhov rooj hais lus muaj ob lub qhov rooj yooj yim thiab ua los ntawm 1-nti los ntawm 6-nti whitewood. Kuv ntxiv qhov nres yooj yim los txwv qhov viav vias ntawm lub qhov rooj thiab kov yooj yim kom yooj yim rau tuav. Cov yas yas thiab cov ntoo ntoo tau saib xyuas ob txoj haujlwm yam tsis muaj kev yuav khoom ntxiv.

Kauj Ruam 5: Kev Tswj Mounting

• Qee cov duab thaum ntxov qhia tus tswj lub lawj li 1-nti los ntawm 6-nti whiteboard. Kuv yuav tsum hloov nws mus rau 1/4 los ntawm 5.5-ntu ntu ntawm cov ntoo plywood kom tso cov joysticks txuas mus ntxiv los ntawm lub vaj huam sib luag yam tsis muaj teeb meem. Thawj daim duab qhia tias pannel tom qab tha xim thiab tag nrho cov nyees khawm txiav tawm. Kuv siv 7/8th qhov txiav los ua lub qhov khawm thiab 5/16 duav me ntsis los txiav tawm lub qhov rau ob lub joysticks.
• Cov kev tswj hwm no yooj yim heev los txuas qhov yooj yim sib txuas los ntawm khawm/joystick mus rau tus tswj thiab tom qab ntawd USB txuas rau Raspberry PI. Kuv nyiam txuas cov tswj hwm mus rau lub zog USB txuas kom tshem tawm kev ntxhov siab ntawm Raspberry PI thawj lub hwj chim pob.
• Peb tau teeb tsa 8 khawm rau txhua tus neeg ua si hauv qab no yog cov qauv.

Tswj vaj huam sib luag:

joystick (1) Y X L / BAR joystick (2) Y X L / BAR

Pem hauv ntej vaj huam sib luag:

(1) Pib Xaiv (2) Pib Xaiv

Kauj Ruam 6: Sab Vaj Huam Sib Luag Fused Fais Fab Hloov

Ntau dua li xuas lub qhov rau peb cov hlua hluav taws xob, peb tau teeb lub qhov hluav taws xob sab nraud nrog lub fuse hloov. Nyob ntawm tus qauv koj yuav cov xov hluav taws xob tuaj yeem sib txawv, tab sis nco ntsoov siv lub tes tsho sib txuas qhov twg cov dav hlau nyob ze ua ke (txo kev pheej hmoo luv). Qhov kev txuas no tseem tso cai rau koj qhib lub hwj chim rau/tawm yam tsis tau qhib nws

Kauj Ruam 7: Txhim Kho Khoom Siv

Cov duab hauv ntu no qhia txog kev teeb tsa kho vajtse

• Daim duab ib thiab ob qhia qhov kawg teeb tsa ntawm lub saib thiab bezel pem hauv ntej
• Daim duab peb thiab plaub qhia cov kab ua npuas ncauj (kom zais qhov tsis zoo hauv kev txiav vaj huam sib luag)
• Daim duab tsib qhia pom qhov kev tso kawm thiab kev tswj hwm kab ke ntawm Raspberry Pi 3+, USB hub, Game game USB boards, powerstrip, thiab thawj tus saib xyuas. Kuv siv daim kab xev velcro los tiv thaiv cov khoom siv rau hauv qab vaj huam sib luag uas tuaj yeem swb tawm sab nraum rooj plaub thaum lub qhov rooj qhib.
• Daim duab thib rau yog qhov kev tso zaum kawg ntawm ob lub USB hais lus, lawv tau muab tso rau hauv yog li lub suab mus rau hauv ntu tseem ceeb uas tau muab lub suab kom zoo nkauj.

Sau ntawv:

• Kev sib txuas los saib xyuas ntawm qhov teeb tsa no yog HDMI rau VGA.
• Cov hais lus tuaj nrog USB-C lub zog, yuav tsum tau ntxiv tus adapter rau tus qauv USB txuas.
• Suab tau txuas nrog Raspberry Pi 3+ ntawm 3.5mm audio jack. Yuav tsum tau teeb tsa uas yog qhov tso tawm ntawm lub system thaum teeb tsa nws.

Kauj Ruam 8: Ua Haujlwm Arcade Video

Nov yog qhov kawg ua haujlwm Arcade nrog PacMan ntsiab lus rau EMULATOR STATION (pem hauv ntej kawg rau arcade)

Ua haujlwm Arcade video

Qee qhov txuas rau software uas khiav lub arcade zoo li Raspberry Pi.

• Retropie: qhov chaw
• Chaw nres tsheb emulator: site
• Raspberry Pi: site