Cov txheej txheem:

Ua Haujlwm Nrog Ob Lub LEDs Siv Arduino UNO hauv TinkerCAD Circuit: 8 Kauj Ruam
Ua Haujlwm Nrog Ob Lub LEDs Siv Arduino UNO hauv TinkerCAD Circuit: 8 Kauj Ruam

Video: Ua Haujlwm Nrog Ob Lub LEDs Siv Arduino UNO hauv TinkerCAD Circuit: 8 Kauj Ruam

Video: Ua Haujlwm Nrog Ob Lub LEDs Siv Arduino UNO hauv TinkerCAD Circuit: 8 Kauj Ruam
Video: $600 NYIAJ PAB CA * $3600 CHILD TAX * BIDEN SPEECH * INDIA KAB MOB HNYAV * TOP NEWS+ 04/29/2021 2024, Kaum ib hlis
Anonim
Image
Image

Txoj haujlwm no qhia txog kev ua haujlwm nrog ob lub LEDs thiab Arduino hauv TinkerCAD kev sib txuas.

Kauj Ruam 1: Lub Hom Phiaj

  • Kev ntsais muag ntawm ob lub LEDs (hloov pauv)
  • Cov nyhuv ploj ntawm ob LEDs (hloov pauv)

Kauj Ruam 2: Cov Cheeb Tsam Yuav Tsum Tau

  • Arduino UNO (1 Tsis yog)
  • Breadboard (1 Tsis yog)
  • Resistor 1k ohm (2 Tsis yog)
  • LED (2 Tsis yog)
  • Jumper hlau (4 Tsis yog)
  • USB cable (1 Tsis yog)

Kauj Ruam 3: Daim duab Circuit Court yooj yim

Breadboard Daim duab
Breadboard Daim duab

Daim duab qhia chaw yooj yim yog qhia hauv daim duab. Nws suav nrog LEDs hauv koob nrog Resistors. Lub zog tau kos los ntawm pawg thawj coj saib Arduino.

Kauj Ruam 4: Breadboard Diagram

Ua cov kev sib txuas raws li qhia hauv daim duab saum toj no.

  • LED (liab): Anode thiab Cathode rau a10 thiab a11 feem ntawm ntawm Breadboard.
  • Resistor: ib kawg rau e10 thiab lwm qhov rau g10.
  • Jumper hlau (liab): txuas tus lej PIN3 (ntawm Arduino) thiab j10 (ntawm lub khob cij)
  • LED (ntsuab): Anode thiab Cathode rau j20 thiab j19 feem ntawm Breadboard.
  • Resistor: ib kawg rau f20 thiab lwm qhov rau d20.
  • Jumper xaim (ntsuab): txuas tus lej PIN6 (ntawm Arduino) thiab a20 (ntawm lub khob cij)

  • Jumper hlau (dub): txuas c11 thiab GND
  • Jumper hlau (dub): txuas h19 thiab GND

Kauj Ruam 5: Thaiv Txoj Cai (rau Qhov Tsoo ntawm Ob LEDs)

Thaiv Txoj Cai (rau Kev Ntsig Ntawm Ob LEDs)
Thaiv Txoj Cai (rau Kev Ntsig Ntawm Ob LEDs)

Tsim Thaiv cov lej raws li qhia hauv daim duab

Kauj Ruam 6: Thaiv Txoj Cai (rau Fading ntawm Ob LEDs)

Thaiv Txoj Cai (rau Fading ntawm Ob LEDs)
Thaiv Txoj Cai (rau Fading ntawm Ob LEDs)

Tsim Thaiv cov lej raws li qhia hauv daim duab

Kauj Ruam 7: Pib Simulation

Nyem Pib Simulation kom pom qhov ua

Kauj Ruam 8: TinkerCAD Circuits

Tsaus muag ntawm ob lub LEDs

Fading ntawm ob LEDs

Pom zoo: